1 - AKAI

CT-2119

Test Mode

Simultaneous press + & - on local panel and then power on with main switch.

Exit: POWER.

2 - Allstar

3750

Hotel Mode

OFF: Select programm 38. Simultaneous press (3 sec) STORE & CONTROL+ on local keyboard.

ON: Select programm 38. Simultaneous press (3 sec) STORE & PROGRAM- on local

keyboard.

3 - AudioTon

CTV 5502

10.3 90° MONO

Child Lock

Clear: Press UP & DOWN buttons together on tv's local control and then switch on. You will see

SERVICE MODE. Do not press any button, just power off the set, then on.

Service Mode

Press UP & DOWN buttons together on tv's local control and then switch on.

4 - Beko

Service Mode:

Simultaneous press P+ & P- on local panel and then power on with main switch.

5 - Blaupunkt

MM63-13VT; FM240.00

ATS

Press button P/C on RC and switch on TV with main switch.

Hotel Mode

Cancel: Press button 'i' on RC and switch on TV with main switch.

6 - Brandt

ICC9

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.

7 - Continental

CT1412B

Service Mode

Press and hold P+ and P- on local panel, thenswitch on TV with main switch.

8 - Ferguson

ICC9

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.)

9 - Ferguson

TX92

Hotel Mode

Cancel: Put TV into standby, then turn power off, then turn power on whilst holding standby button on remote and step through menus to vol set and increase level to max.

10 - Finlux

17/21B60

63/71Y2: STEREO PLUS

Service Mode

MUTE --> OK (M) --> TV

Controls: cursor buttons.

Store: OK (M).

Exit: TV

11 - GoldStar

MC-51B

Service Mode

Simultaneously press MENU, VOL-, PR- onthe local panel.

12 - Graetz

BURGGRAF

STEREO 4876

Digivision

DIGI III 110°

Service Mode:Turn on 'TV Internal Service Program' switch on the digital modul (SE on display). On RC: 1=U1 V SHIFT, 2=U2 V LIN DN, 3=U3 V LIN, 4=H1

H SHIFT, 5=H2 H AMP, 6=H3 EW AMP, 7= C, 8=C1, 9=C2, 0=H4 EW TRAPEZ... TV=MEMO, VOL+/-=ADJUST.

13 - Grundig

CUC1800

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Service Mode: Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'.

14 - Grundig

CUC1805

ATS Reset

Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set.

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Default - Values - Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Service Mode

Press 'i'. Dialog Center-->Service--> 'for authorized dealer'-->Code Number 8500.

Volume

Offset

Cancel: Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

15 - Grundig

CUC1806

Child Lock

Cancel: General reset with number 7038.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM; Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory; Default; Values; Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

16 - Grundig

CUC1821

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Service Mode

Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'.

17 - Grundig

CUC1822

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Service Mode

Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'.

18 - Grundig

CUC1824

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM; Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Service Mode

Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'.

19 - Grundig

CUC1825

ATS Reset

Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set.

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

ROM Data

Loading

Press and hold the P- buton on the TV and switch on with the mains button. Loading the Average Values / Emergency Data Set (ROM Dana). This is only possible once on replacement of the NVM or uP.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

Volume

Offset

Cancel: Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

20 - Grundig

CUC1826

ATS Reset

Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set.

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

ROM Data

Loading

Press and hold the P- buton on the TV and switch on with the mains button. Loading

the Average Values / Emergency Data Set (ROM Dana). This is only possible once on

replacement of the NVM or uP.

Service Mode

Press 'i'. Dialog Center --> Service --> 'for authorized dealer' --> Code 8500.

Volume

Offset

Cancel: Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

21 - Grundig

CUC1827

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

Volume

Offset

Cancel: Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

22 - Grundig

CUC1828

Child Lock

Cancel: General reset with number 7038.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

23 - Grundig

CUC1829

Child Lock

Cancel: General reset with number 7038.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

24 - Grundig

CUC1830

Child Lock

Cancel: General reset with number 7038.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

25 - Grundig

CUC1836

Child Lock

Cancel: General reset with number 7038.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

26 - Grundig

CUC1842

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

27 - Grundig

CUC1851

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Service Mode

Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'.

28 - Grundig

CUC1852

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Service Mode

Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'.

29 - Grundig

CUC1881

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' -->OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr.

(19798-300.01) indicates the EPROM version.

Service Mode

Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'.

30 - Grundig

CUC1892

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Service Mode

Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'.

31 - Grundig

CUC1894

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+'

button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr.

(19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

32 - Grundig

CUC1929

Child Lock

Cancel: General reset with number 7038.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only or retailer', 'Code 8500'.

33 - Grundig

CUC1952

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

34 - Grundig

CUC1962

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

35 - Grundig

CUC1983

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting

Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

36 - Grundig

CUC1984

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Demo Mode

Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s.

Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Factory

Default

Values

Resetting Buttons 'AUX', 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

37 - Grundig

CUC2020

Band Limits

Cancelling Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order.

Child Lock

Cancel: General reset with number 7038.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button.

(Additionally on replacement of the memory, the

Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be

readjusted).

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

OSD position Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

38 - Grundig

CUC2030

Band Limits

Cancelling

Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order.

Child Lock

Cancel: General reset with number 7038.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button.

(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

OSD position Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

39 - Grundig

CUC2031

Band Limits

Cancelling

Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operaten the buttons 'AUX', 'OK' in this order.

Child Lock

Cancel: General reset with number 7038.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button.

(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

OSD position Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

40 - Grundig

CUC2050

Band Limits

Cancelling

Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order.

Child Lock

Cancel: General reset with number 7038.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button.

(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

OSD position Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

42 - Grundig

CUC2051

Band Limits

Cancelling

Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order.

Child Lock

Cancel: General reset with number 7038.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button.

(Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

OSD position Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

Service Mode

Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.

43 - Grundig

CUC6300

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Default

Values

Entering

Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide: 'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu.

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

OSD position Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

44 - Grundig

CUC6301

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Default

Values

Entering

Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide: 'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu.

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

OSD position Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

45 - Grundig

CUC6310

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Default

Values

Entering

Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide: 'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu.

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

OSD position Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

46 - Grundig

CUC6330

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu withn button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

47 - Grundig

CUC6331

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

48 - Grundig

CUC6360

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Hotel Mode

Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

Service Mode

Depress and hold the 'P/C' button on the RC while switching on with the mains button.

49 - Grundig

CUC6360

Volume

Offset

Cancel: Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

50 - Grundig

CUC6365

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Hotel Mode

Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

Service Mode

Depress and hold the 'P/C' button on the RC while switching on with the mains button.

Volume

Offset

Cancel: Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

51 - Grundig

CUC6380

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Hotel Mode

Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

Service Mode

Depress and hold the 'P/C' button on the RC while switching on with the mains button.

Volume

Offset

Cancel: Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

52 - Grundig

CUC6450

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Hotel Mode: Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

Service Mode

Depress and hold the 'P/C' button on the RC while switching on with the mains button.

Volume

Offset

Cancel: Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

53 - Grundig

CUC6460

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Hotel Mode

Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

Service Mode

Depress and hold the 'P/C' button on the RC while switching on with the mains button.

Volume

Offset

Cancel: Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

54 - Grundig

CUC6469

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

Default

Values

Entering

Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressingthe 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Hotel Mode

Depress and hold button 'P/C' on the RC whileswitching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

Service Mode

Depress and hold the 'P/C' button on the RC while switching on with the mains button.

Volume

Offset

Cancel: Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

55 - Grundig

CUC7300

Default

Values

Entering

Depress and hold down button 'P-' on the RC and switch the TV on from Standby with the local 'P+' button. (This is only possible once on replacement of the NVM or uP).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Hotel Mode

Depress and hold button 'P/C' while switching on from Standby with button 'P+' on the TV. Set the Hotel Mode to 'OFF' with 'OK'.

Volume

Offset

Cancel: Depress and hold the 'AUX' button on the RC while switching the TV on from Standby with the local 'P+' button.

56 - Grundig

CUC7301

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

57 - Grundig

CUC7302

Default

Values

Entering

Depress and hold down button 'P-' on the RC and switch the TV on from Standby with the local 'P+' button. (This is only possible once on replacement of the NVM or uP).

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Hotel Mode

Depress and hold button 'P/C' while switching on from Standby with button 'P+' on the TV. Set the Hotel Mode to 'OFF' with 'OK'.

Volume

Offset

Cancel: Depress and hold the 'AUX' button on the RC while switching the TV on from Standby with the local 'P+' button.

58 - Grundig

CUC7303

Band Limits

Cancelling

Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order.

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

OSD position Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

59 - Grundig

CUC7305

Band Limits

Cancelling

Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order.

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

OSD position Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

60 - Grundig

CUC7350

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

61 - Grundig

CUC7851

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

62 - Grundig

CUC7880

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

63 - Grundig

CUC7890

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr: Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

64 - Grundig

CUC7951

Child Lock

Cancel: Press VOL+, VOL-, PR-, PR+, OK.

EPROM

Version Nr.

Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

65 - Grundig

GV200 to GV250

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the STOP button.

66 - Grundig

GV201-1

VCR

Electronic

Lock Cancel

Press the 'STANDBY' button on the remote control handset until 'FREE' is indicated on the display of the video recorder.

67 - Grundig

GV25SV/5; GV45SV/5

VCR

Electronic

Lock Cancel

Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder.

68 - Grundig

GV280PC

GV280S

VCR

Electronic

Lock Cancel

Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button 'OK'. Press the STOP button.

69 - Grundig

GV400; GV400GB; GV400OST

VCR

Electronic

Lock Cancel

With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.

70 - Grundig

GV4000VPS; GV4001

VCR

Electronic

Lock Cancel

With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.

71 - Grundig

GV4003VPS

VCR

Electronic

Lock Cancel

With the video recorder switched off (Stand-by) press the Stop button on the RC until 'FREE' appears on the display of the recorder.

72 - Grundig

GV400VPS; GV401VPT

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

73 - Grundig

GV4010SV-VPT; GV4092; GV4192VPS; GV4200SV-VPT; GV4400HiFi; GV4592..

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

74 - Grundig

GV402

VCR

Electronic

Lock Cancel

With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.

75 - Grundig

GV404SV; GV405EURO; GV406EURO

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

76 - Grundig

GV410

VCR

Electronic

Lock Cancel

With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.

77 - Grundig

GV410VPS; GV411

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

78 - Grundig

GV411-1

VCR

Electronic

Lock Cancel

Press and hold the 'STAND-BY' button on the RC (ca. 5s), until 'UNLOCKED' appears on the display of the recorder.

79 - Grundig

GV411OST; GV412

VCR

Electronic

Lock Cancel

With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.

80 - Grundig

GV414SV; GV415EURO; GV416EURO; GV420VPT

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

81 - Grundig

GV430; GV430GB

VCR

Electronic

Lock Cancel

With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.

82 - Grundig

GV430VPS; GV434SV; GV435EURO

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

83 - Grundig

GV440..; GV450..; GV460..; GV464..; GV465EURO; GV470..

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

84 - Grundig

GV500..; GV501VPT; GV505EURO; GV506EURO

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

86 - Grundig

GV5000; GV5000GB; GV5000VPS; GV5000VPS/5

VCR

Electronic

Lock Cancel

Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder.

87 - Grundig

GV5002VPS; GV5003; GV5008; GV5050

VCR

Electronic

Lock Cancel

Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder.

88 - Grundig

GV5050SV; GV5050SV/1; GV5055EURO; GV5095..

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

89 - Grundig

GV510SV; GV511; GV515EURO; GV530..; GV535EURO; GV540..;GV545EURO

GV560..; GV565EURO

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

90 - Grundig

GV5300..

VCR

Electronic

Lock Cancel

Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder.

91 - Grundig

GV5395..; GV5400..; GV5695HiFi

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

92 - Grundig

GV600; GV630; GV640HiFi; GV640NIC; GV645EURO; GV650HiFi; GV660HiFi

GV660NIC; GV665EURO; GV670ShiFi; GV670SNIC; GV690ShiFi; GV690SNIC

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

93 - Grundig

GV6096SV; GV6096SV/1; GV6396SV; GV6596HiFi; GV6596NIC

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

94 - Grundig

GV740..; GV745EURO

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

95 - Grundig

GV7400..

VCR

Electronic

Lock Cancel

Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder.

96 - Grundig

GV7497NIC

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

97 - Grundig

GV8..; KV8..; SE8..

VCR

Electronic

Lock Cancel

Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder.

98 - Grundig

GVP600ICNEURO

VCR

Electronic

Lock Cancel

Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder.

99 - Grundig

KV5001VPS/5; KV5301VPS/5

VCR

Electronic

Lock Cancel

Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder.

100 - Grundig

MV4005; MV4105

VCR

Electronic

Lock Cancel

With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.

101 - Grundig

SE4100VPS; SE4104SV; SE4120SV

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

102 - Grundig

SE5102SV; SE5104SV; SE5106HiFi

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

103 - Grundig

SE6102SV; SE6104SV; SE6106HiFi

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

104 - Grundig

SE7104SV

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

105 - Grundig

SE7105

VCR

Electronic

Lock Cancel

Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder.

106 - Grundig

SE7106HiFi

VCR

Electronic

Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the

remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

107 - Grundig

TVR3700

VCR

Electronic

Lock Cancel

Press and hold STOP button on the RC and depress the PLAY button on the video recorder. Press the 'STAND-BY' button or disconnect the video recorder from the mains.

108 - Grundig

TVR3701; TVR3705; TVR3710; TVR3720; TVR3730

VCR

Electronic

Lock Cancel

Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-.

109 - Grundig

TVR4500; TVR4510

VCR

Electronic

Lock Cancel

Interconnect the service test points on the keyboard control unit for a short period.

Switch the unit off and disconnect it from mains.

110 - Grundig

TVR5100; TVR5130; TVR5500

VCR

Electronic

Lock Cancel

Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-.

111 - Grundig

TVR5510

VCR

Electronic

Lock Cancel

Interconnect the service test points on the keyboard control unit for a short period.

Switch the unit off and disconnect it from mains.

112 - Grundig

TVR5530

VCR

Electronic

Lock Cancel

Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-.

113 - Grundig

VS200 to VS267

VCR

Electronic

Lock Cancel

Switch the video recorder off. Remove the top of the cabinet. Unplug the B1 connector on the sequence control. Switch the recorder on. After approx. 2 seconds, re-insert the B1 connector. Switch the video recorder off. Re-fit the top of the cabinet.

114 - Grundig

VS300 to VS460

VCR

Electronic

Lock Cancel

Switch the video recorder off. Remove the top of the cabinet. Switch the recorder on.

Interconnect the service test points on the keyboard control unit for a short period. Press

the STOP button. Switch the video recorder off. Re-fit the top of cabinet.

115 - Grundig

VS500

VCR

Electronic

Lock Cancel

Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button '0000'. Press the STOP button.

116 - Grundig

VS505 to VS510

VCR

Electronic

Lock Cancel

Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button 'OK'. Press the STOP button.

117 - Grundig

VS520 to VS550

VCR

Electronic

Lock Cancel

Switch the video recorder off. Remove the top ofthe cabinet. Switch the recorder on.

Interconnect the service test points on the keyboard control unit for a short period. Press

the STOP button. Switch the video recorder off. Re-fit the top of cabinet.

118 - Grundig

VS600 to VS960

VCR

Electronic

Lock Cancel

Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button 'OK'. Press the STOP button.

119 - ITT

STEREO PLUS

Service Mode

MUTE --> OK (M) --> TV

Controls: cursor buttons.

Store: OK (M).

Exit: TV

120 - LG

MC64; MC84

Service Mode

Simultaneous press OK on RC & local panel.

121 - Loewe.

Art.-Nr. 64420; 66426 66449; 66450 66460; 66480 66490; C9000

TV Service

Mode Simultaneous press CM on the RC & "Service" key on the control panel.

Select: MEM IN/OUT.

Adjust: VOL +/-.

Store: X.

Exit: TV.

122 - Loewe.

Art.-Nr. 64420; 66426 66449; 66450 66460; 66480 66490

C9000

VT Service

Mode Simultaneous press VT on the RC & "Service" key on the control panel.

Select: MEM IN/OUT.

Adjust: VOL +/-.

Store: X.

Exit: TV

123 - Loewe.

C9003

Service Mode

On the local control press function key five times (indication "Service" will appear), afterwards within a sec. press key "MEN" on the remote control.

Store: X.

Exit: TV.

124 - Loewe.

Q2200

Service Mode

Go to 'SERVICE' in menu and then quick press 'MENU' on the RC.

Select: yellow cursors.

Adjust: +/-.

Store: 'X'.

Exit: 'TV'.

125 - Luxor

5585-21A1;b 7057-27; 63/7954; STEREO PLUS

Service Mode

MUTE --> OK (M) --> TV

Controls: cursor buttons.

Store: OK (M).

Exit: TV

126 - Mitsubishi

CT21M5E

Service Mode

Press S701 (on board) and button 9 (in 5s).

Store: '0'.

Exit: stand-by.

127 - NEC

Xexx; XPxx; XVxx; MON

Service Mode

Select DISPLAY MODE. Press PROCEED. Press and hold RESET. Then simultaneous press + & -. 'Warning Entering Service Menu...' appears. Press PROCEED for enter. Be careful! You can damage a monitor!

128 - Nokia

6364; 7364; 2B-F

Service Mode

Quick press: --\-, MENU, TV.

129 - Nokia

EUROSTEREO

Service Mode

In 1s press buttons '-/--', 'MENU', 'TV'.

Select: PR+/-.

Adjust: VOL+/-.

Store: fill-dot-symbol on RC (near 'i' button).

Exit: 'STANDBY'.

130 - Nokia

63/7168 55A1-0; 45H1-0 55Y2-0; 63/7157 63/7177; STEREO PLUS

Service Mode

MUTE --> OK (M) --> TV

Controls: cursor buttons.

Store: OK (M).

Exit:TV

131 - Nokia

STEREO PLUS

Service Mode

i --> M --> PROGR.

Controls: cursor buttons.

Store: M.

Exit: TV

132 - Nordmende

DC1

Service Mode

Switch to Standby. Switch off with the mains switch. Press and hold red button on RC and then switch on with the mains switch (cca 10s).

Select: numbers buttons.

Adjust: +/-.

Store: red button.

Exit: 'MUTE'.

133 - Nordmende

DC2

Service Mode

Switch to Standby. Switch off with the mains switch. Press and hold red button on RC and then switch on with the mains switch (cca 10s).

Select: numbers buttons.

Adjust: +/-.

Store: red button.

Exit: 'MUTE'.

134 - Nordmende

Color 3038

F15-03 110°

MDA2061

Replacement

After replacement of the MDA2061 (IR73) the TV receiver acts as folows: a) All programme storages have stored Ch00. b) The indicator shows German function characters. c) PAL and SECAM EAST standard recepcion is possible (not NTSC and/or SECAM WEST). If required to change according to paragr. b and c then switch off the set by the mains switch. Press both buttons + and - for volume on TV and simultaneously switch the set on with the mains switch. Keep the two volume buttons

pressed until the display indicates Pr. After 8s the display indicates __. Now the following buttons can be presseed on the RC, thus additional corresponding segments will be illuminated: Button '1' function symbols indicate international display. Reversible to German display with button '2'. Button '5' additional ECAM WEST and/or NTSC reception Multistandard). Reversible to Single Standard ith button '3'.

Store: tand-By.

135 - Nordmende

ICC10

Service Mode

Switch to Stand By. Switch off with the mains switch. Press and hold 'VT' on RC then switch on with the mains switch.

136 - Nordmende

ICC9

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press blue button on RC and switch on TV with main switch. Press blue button again. (WARNING: scart must be free.)

137 - Palladium

TV-100

Service Mode

Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneously press P- & P+ on local keyboard.

Commands: arrows.

Store: OK.

Exit: TV.

138 - Panasonic

EURO-1

Service Mode

In Sound-Menu Low-tone-regel to MAX and High-tone-regel to MIN. Press VOL- on TV and RESET on RC in some time.

Select: red and green buttons.

Adjust: yellow and blue buttons.

Store: 'STORE'. Exit: switch off.

139 - Panasonic

EURO-2

Service Mode

In Sound-Menu Low-tone-regel to MAX and High-tone-regel to MIN. Press 'F' button on TV. Then press VOL- on TV and REVEAL on RC in some time.

Select: red and green buttons.

Adjust: yellow and blue buttons.

Store: 'STR'.

Exit: 'N' on RC.

140 - Panasonic

MX-3; MX-3C

Hotel Mode

ON: Press simultaneously 'OFF TIMER' on RC and 'CH.UP' local.

OFF: Press simultaneously 'OFF TIMER' on RC and 'VOL-' local.

Service Mode

Simultaneously press 'RECALL' on RC and 'VOL-' local.

Exit: 'NORMAL' on RC.

141 - Philips

ANUBIS B

Hotel Mode

ON: Set HOTEL ON in Service Menu. Select programm 38. Simultaneous press (3 sec)

INSTALL & P- on local keyboard.

OFF: Set HOTEL OFF in Service Menu.

Service Mode

Simultaneously press VOL+ & P- on RC.

Exit: STANDBY.

142 - Philips

Anubis S

Hotel Mode

OFF: Select programm 38. Simultaneous press (3 sec) PR+ & VOL- on local keyboard.

ON: Select programm 38. Simultaneous press (3 sec) STORE & PR- on local keyboard.

143 - Philips

L7.1A

Service Mode

With special service RC. Or short M25, M25 on board and then switch on TV.

Exit: st-by.

144 - Philips

L9.1

Hotel Mode

Select program 38 on the TV. Simultaneously press the keys VOLUME- and VOLUME+ on the keyboard of the TV and the OSD key of the remote control.

145 - Philips

L9H

Service Mode

This model also supports the 062596 sequence followed by [MENU] (service default) or

[i+]/[OSD] (service mode).

146 - Philips

MD1.2E

Service Mode

There is a small Service jumper to short on the small signal PCB. When the TV is in this first level service mode, you can go in the second level service mode by pressing both MENU and - keys on top of the TV at the same time. There you can read much parameters and proceed with most of the adjustments. In fact this method let you use an ordinary Remote control but you also need to open the back cover. With the special service remote control a special code is sent to enter the service mode.

147 - Philips

MG3.1E

Service Mode

Option 1: In the TV-set itself is a 3-pin connector with which either SERVICE-DEFAULT or SERVICE-MODE can be activated. This connector is depicted 0356 (SERVICE-PINS) on page K7 (TXT&CONTROL). Shorting pins 1-2 will activate SERVICE-MODE. Shorting pins 2-3 will activate SERVICE-DEFAULT.

Option 2: Activate these modes using the remote control. Obviously option 2 is the preferred method because the settings have to be changed using a remote control anyway.... To activate SERVICE-DEFAULT: Press 0 6 2 5 9 6 and then the [menu] button. The message 'Service Default' appears and channel 'SER T' will be selected.

This only sets some settings to a preset value (color/brightness/volume and such). This mode is primarily intended to be used when the non volatile memory has been replaced. It is then loaded with the default values. To activate SERVICE-MODE: Press 0 6 2 5 9 6 and then the [i+] button. After pressing 0 6 2 5 9 6 the message 'Dealer' should have appeared. Do not worry about the channel changing while you press the numbers. Service technicians have the means of entering service mode using a special remote control.

148 - Philips

29PT9416

MG7.1

CTV

Service Mode

Use the standard remote control an key in a special sequence (62596 followed by

pressing the 'MENU' button. If the main menu also appears with the service menu just press 'MENU' again to clear it. The other way is to short the two service pins on the signal panel (pins 2 and 3 of connector 0356). The advantage of this last method is that all the software protections are turned off.

149 - Philips

Y6

Service Mode

Use the standard remote control an key in special sequence 0 6 2 5 9 6 followed by

pressing the 'MENU' button. If the main menu also appears with the service menu just press 'MENU' again to clear it.

150 - Philips

VR210/58

Modulator

off

Without cassette. Press and hold SYSTEM till 'G591' appears. Press and hold CLEAR(CL) till 'MOFF' appears.

Exit: TV/STANBY.

151 - Philips

VR210/58

VCR

Modulator

Without cassette. Press and hold SYSTEM till 'MOFF' appears. Press and hold CLEAR(CL) till 'G591' appears.

Exit: TV/STANBY.

152 - Philips

VR220/58

VCR

Child Lock

Cancel Press CHILD LOCK (key-simbol) on the RC for 5s with the VCR switched on.

VCR

Modulator

on/off

Without cassette. Press and hold STOP on the RC and then press STOP/EJECT on VCR.

Select the line 'MODULATOR' on the TV screen or 'MOD+' in the display with P+/-. In the display select 'OFF' / 'MOD-' (modulator off) with VOLor 'MOD+' (modulator on). Confirm with OK.

Exit with MENU

153 - Philips

VR220/58

VCR

Modulator

Without cassette. Hold the STOP button on the RC. In addition press the STOP/EJECT button on the VCR until the pre-set modulator frequency appears in the display, e.g. 'M591' (591MHz or 36 ch. UHF). Select line 'OPTIMIZE FREQUENCY' using P+/-. Enter new modulator frequency with the numbers 0-9. In line 'SOUND SYSTEM' select the TV system using VOL+/-. 'G' = PAL B/G. 'K' = SECAM D/K.

Confirm with OK. 'STORED' will appear brieflyon the screen.

154 - Philips

VR220/58

VCR

Reset to

factory

Disconect from the mains power supply. Press and hold the STANDBY/ON button on the device and reconnect to the mains power supply. Release the button when 'OSD' appears in the

VCR display.

155 - Philips

VR400/58

VCR

Auto ST-BY

off

Press and hold STOP till [] appears.

156 - Philips

VR400/58

VCR

Modulator

off

Without cassette. Press and hold SYSTEM till 'G591' appears. Press and hold CLEAR(CL) till

'MOFF' appears.

Exit: TV/STANBY.

157 - Philips

VR400/58

VCR

Modulator

Without cassette. Press and hold SYSTEM till 'MOFF' appears. Press and hold CLEAR(CL) till 'G591' appears.

Exit: TV/STANBY.

158 - Philips

VR400/58

VCR

Modulator

Preset Without cassette. VCR st-by. Press and hold SYSTEM till 'G591' appears. System change:

SELECT. Freq.

Change: P +/-.

Store: OK.

Exit: TV/STANBY.

159 - Revox

D-TV

C9003

Service Mode

On the local control press function key five times (indication "Service" will appear), afterwards within a sec. press key "MEN" on the remote control.

Store: X.

Exit: TV.

160 - Saba

ULTRACOLOR; T55U42 T55U43; T63U42 T63U43; ICC5115ML 110;

ICC5116MM 90°

Combination

Lock Cancel: Switch off set with main switch. Switch on setwith main switch and during doing this press the buttons + and - of volume control on the set's control bord simultaneously until the display lights. Display: SS... Press the button 'S' on the RC. Switch off with RC. Now the combination lock is unlocked and one can switch on again in the normal manner.

161 - Saba

ICC9

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.)

162 - Saba

T7032VT

TX92

Hotel Mode

Cancel: Put TV into standby, then turn power off, then turn power on whilst holding standby button on remote and step through menus to vol set and increase level to max.

163 - Salora

28N8S

2B-F

Service Mode

Quick press: --\-, MENU, TV.

164 - Salora

17/21SF 25/28X71; 25/28SP50STEREO PLUS

Service Mode

MUTE --> OK (M) --> TV

Controls: cursor buttons.

Store: OK (M).

Exit: TV

165 - Samsung

CB-14F1 CB-20P30; CB-20H1 CB-20S20; CB-21H1 CB-21P30; CB-21S20 CB-3373

CB-5020 CB-5073; CB-5079 CB-5320; CB-5373 CB-5379; S15A

Service Mode

STAND-BY --> DISPLAY --> P.STD --> MUTE --> POWER ON.

Controls: VOL +/-, CH +/-.

Exit: POWER OFF.

166 - Samsung

CK5038; SCT11B

Service Mode

STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON.

Controls: VOL +/-, CH +/-.

Exit: STATUS.

167 - Samsung

CX5944 CX6844; SCT12B

Service Mode

STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON.

FACTORY MODE: set PSL=15 and PVA=63.

Controls: VOL +/-, CH +/-.

Exit: STATUS

168 - Samsung

CB-14V10 CB-3373; CB-14V20 CB-5073; CB-20P30 CB-5079; CB-20S10 CB-5373

CB-20S20; CB-21P30; CB-21S10; CB-21S20; SCT13B

Service Mode

STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON.

Controls: VOL +/-, CH +/-.

Exit: STATUS.

169 - Samsung

CS7272; SCT51A

Service Mode

PICTURE OFF --> SLEEP --> P.STD --> MUTE --> PICTURE ON

170 - Samsung

CS-721; CS-723; SCT52A

Service Mode

PICTURE OFF --> SLEEP --> P.STD --> MUTE --> PICTURE ON

171 - Samsung

TVP3350; TVP5050; SCV11A; SCV11B; CTV/VCR

Service Mode

STAND-BY --> P.STD --> MENU --> SLEEP --> POWER ON

172 - Schneider

DTV 1

Service Mode

Simultaneous press Service-button on digibord & button C on RC.

Selection: Bass +/-.

Adjust: Volume +/-.

Store: T.

Exit: TV.

173 - Schneider

DTV 100

Service Mode

Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & P+ on local keyboard.

Commands: arrows.

Store: OK.

Exit: TV.

174 - Schneider

DTV 2

Service Mode

Like DTV 1 or simultaneous press Servicebutton (down right on RC) & C button on RC.

Selection: Bass +/-.

Adjust: Volume +/-.

Store: IDEAL.

Exit: TV.

175 - Schneider

DTV 3

Service Mode

Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.

Selection: wheel.

Adjust: ring.

Store: red button.

Exit: OFF.

176 - Schneider

TV 4

Service Mode

Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.

Selection: P +/-.

Adjust: VOL +/-.

Store: auto.

Exit: OFF.

177 - Schneider

STV7128; TV 8

Service Mode

Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.

Selection: P +/-.

Adjust: VOL +/-.

Store: auto.

Exit: OFF.

179 - Schneider

TV 9

Service Mode

Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.

Selection: P +/-.

Adjust: VOL +/-.

Store: auto. Exit: OFF.

180 - Schneider

STV355FST

Service Mode

MENU --> SERVICE --> OK --> 089

181 - SEG

11AK18

Service Mode

MENU 1 6 7 5

182 - SEG

11AK19

Service Mode

MENU 4 7 2 5

183 - Seleco

STEREO PLUS

Service Mode

MUTE --> OK (M) --> TV

Controls: cursor buttons.

Store: OK (M).

Exit: TV

184 - Sharp

4BSA

Service Mode

Short conntacts 2 & 6 on bord TB connector and press button 'MODE' on RC. Remove short.

Store: auto.

Exit: 'MODE'.

185 - Sharp

63CS-03S; CS

Service Mode

Press and hold buttons VOL- and PR+ on the local keyboard and then switch on with main switch.

Store: 'POWER'.

186 - Sharp

D3000; CTV

Service Mode

Press Service-button on Digi - modul.

Store: on/off.

Exit: Service button.

187 - Sharp

Euro-DS1

Service Mode

Short conntacts 2 & 6 on Digi Modul Service Slot and then press button 'MODE' on RC.

Store:(romb-symbol) on RC.

Exit: standby, switch off, switch on, remove short.

188 - Sharp

54AT-15SC

Service Mode

Press and hold buttons VOL- and PR+ on the local keyboard and then switch on with main switch.

Store: 'POWER'.

189 - Sharp

DV-5401S

Service Mode

Locate place for 2 buttons on local keyboard (main board) S754-MODE and S755-PRESET.

Enter: short S754 (-SERV-).

Commands: CH +/-.

Store: short S755.

190 - Siemens

FS369M4

CS9409

Service Mode

Info Center' --> 'Special Functions' --> 'Service' --> Code Number 089

191 - Siemens

SAT

Programm

Lock

Unlock: Press key-symbol and 6 1 0 1.

192 - Silva

STV355FST

Service Mode

MENU --> SERVICE --> OK --> 089

193 - Sony

KV-E2531; KV-E2931; KV-E3431; AE-2

Service Mode

Turn on the main power switch of the set while pressing any two buttons on the front panel. 'TT' will appear on the upper right corner of the screen. Press the 'MENU' button on the RC. In menu select 'DEMO' and press 'OK'. Select DEVICE coresponding to the adjustment you need.

Store: OK.

Exit: turn off.

194 - Sony

KV-2170; KV-2180; KV-2540; BE4

Service Mode

? --> 5 --> VOL+ --> TV --> MENU

Exit: 00

195 - Sony

KV-B2911

Service Mode

Turn on the main power switch of the set while; pressing any two buttons on the front panel. 'TT' will appear on the upper right corner of the screen. Press the 'MENU' button on the RC. In menu select 'DEMO' and press 'OK'.

Select: DEVICE coresponding to the adjustment you need.

Store: OK.

Exit: turn off.

196 - Sony

KV-G21M1

Service Mode

Switch TV to STANDBY.

DISPLAY --> 5 --> VOL+ --> POWER

197 - Telefunken

ICC9

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.)

198 - Telefunken

STEREO PLUS

Service Mode

MUTE --> OK (M) --> TV

Controls:cursor buttons.

Store: OK (M).

Exit: TV

199 - Telefunken

TX-90

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC

and switch on TV with main switch. Press VT button again.

200 - Telefunken

TX-91

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.

201 - Thomson

ICC19

Service Mode

Switch to Standby. Switch off with the mains switch. Press and hold blue button and then switch on with the mains switch. Press blue button again.

Exit: switch off with mains switch.

202 - Thomson

ICC19

Service Mode

Switch to Standby. Switch off with the mains switch. Press and hold 'PROG-' and 'VOL-' and then switch on with the mains switch.

Exit: switch off with mains switch.

203 - Thomson

ICC9

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.)

204 - Thomson

TX-90

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.

205 - Thomson

TX-91

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.

206 - Toshiba

a2150; S5E

Service Mode

Press 'MUTE' button. Press and hold 'MUTE' button and press 'MENU' on local keyboard.

Select: PR nr..

Adjust: VOL+/-.

Store: auto.

Exit: 'STANDBY'. Test picture: 'AV'.

207 - Toshiba

2876DD; 2988DG

Service Mode

Press 'MUTE' button. Press and hold 'MUTE' button and press 'MENU' on local keyboard.

Select: PR+/-.

Adjust: VOL+/-.

Store: auto.

Exit: 'STANDBY'. Test picture: 'AV'.

208 - Universum

6000

Service Mode

Switch on with main switch. Press 'MENU', 'TV', 'i'. If TV is still in st-by press 2x'TV', 'i'.Select and adjust with cursors.

Store: 'OK'.

Exit: switch off with main switch.