Chào các bạn! Vì nhiều lý do từ nay Truyen2U chính thức đổi tên là Truyen247.Pro. Mong các bạn tiếp tục ủng hộ truy cập tên miền mới này nhé! Mãi yêu... ♥

Sci fi oc part 2



.


.


.


.here are some of the fighters and all they have among there ships

amour/cloths

navy/officers

the navy amour is colore code 

Operations section is Yellow

Medical is Pink

Sience is Blue

Logistics is Orange 

Pilots ( for when there not on duty  or they wear this under there amour) is black

Navigation is green

Security  is dark Gary thow they wear it under there amour

Command staff  ( so all commanding officers/ leaders of all the different sections ) wear White

Combat teams  ( so ship gunners and all ) wear red

and Engineering where a lighter gray

.

.

.

solder amour  ( both men and woman wear this)

this amour is what both men and woman use

More advanced than the Phase I clone trooper armor, Phase II armor was capable of supporting more specialized equipment It was, therefore, more expensive to produce it also had consisted of twenty form-fitting plates of lightweight plastoid-alloy composite. Those plates were sealed to a black temperature control bodysuit via magnatomic gription panels. 

The bodysuit was also pressurized, offering temporary protection against the vacuum of space, and the body glove protected the clone from the extreme cold and heat it can also take a good pounding from gun fire and While Phase II was capable of withstanding impacts, pressure, heat and acrid vapors

.

.

.

Pilot amour ( both men and woman  wear this there also 2 typs)

1 this amour has a more of a open helmet  and visor ont he amour for Pilot to use this is for more relax pilot and battle in the sky/ atmosphere

the Armor was capable of supporting more specialized equipment It was, therefore, more expensive to produce it also had consisted of twenty form-fitting plates of lightweight plastoid-alloy composite. Those plates were sealed to a black temperature control bodysuit via magnatomic gription panels.

The bodysuit was also pressurized, offering temporary protection against the vacuum of space, and the body glove protected the clone from the extreme cold and heat it can also take a good pounding from gun fire and While Phase II was capable of withstanding impacts, pressure, heat and acrid vapors

.

.

.

Astromech droids

Astromech droids, also referred to as astro droids or mechs, were a type of repair droid that served as an automated mechanic on starships. These compact droids used tool-tipped appendages stored in recessed compartments. Many starfighters relied on astromech copilots to control flight and power distribution systems Sitting in an astromech socket exposed to space, the droid, in addition to its piloting duties, could calculate hyperspace jumps and perform simple repairs.

Most astromechs were only able to communicate in writing, conveyed via another computer system, or through a special code of clicks, bleeps, and similar sounds, known as . However, certain other droids, such as , could understand the binary code of astromechs, and often translated from binary to other languages.

Astromech droids averaged 0.93 meters in height while R-series droids from the R2 line forward had a height of just over a meter However, the astromech P2 stood around the same height as a human Some astromechs, such as OC-JK14, were moved on treadwells

thow there mostly use to help out among the fleet in fixing thing

.

.

.

2 this outfit is more for pilot to use  it also has a mask at the front to help pilot  breath  as this amour is use more for space combat but also atmosphere combat

the Armor was capable of supporting more specialized equipment It was, therefore, more expensive to produce it also had consisted of twenty form-fitting plates of lightweight plastoid-alloy composite. Those plates were sealed to a black temperature control bodysuit via magnatomic gription panels.

The bodysuit was also pressurized, offering temporary protection against the vacuum of space, and the body glove protected the clone from the extreme cold and heat it can also take a good pounding from gun fire and While Phase II was capable of withstanding impacts, pressure, heat and acrid vapors

.

.

.

there 2 legion's of solders on  the fleet 

the 1st is the 501st legion

they wear all blue and white amour

.

.

.

the 2nd is the 322nd legion

there amour is like the 501st but there helmet different 

.

.

.ARF troopers

they are the scouts and also use the AT RT

there also use for sneeking around and working in the shadow to get infos

.

.

.

fighters/ bombers

BTL-B Y-wing fighter-bomber  or short known as Y wing bombers



the Y wing was a model of starfighter-bomber Designed by Koensayr Manufacturing, the BTL-B Y-wing was intended to serve as a combination starfighter and long-range bomber. The two large Koensayr along with their characteristic nacelles, were carried by a cross wing, which connected to the cockpit module by a central spar. BTL-Bs were equipped with hyperdrives unlike many other starfighters This, along with the fuel recycling system present in all BTLs, made Y-wings durable long-range craft, though their tendency to run hot necessitated a complex cooling system extending throughout the ship

The wedge-shape cockpit module carried one pilot and one tailgunner in a rotating bubble turret These positions were built with Pilots in mind though they could be adjusted by mechanics for other operators The module also featured an astromech socket located directly behind the turret

the ship is Length 23.4 meters and has 2 Laser Cannons on the Front of the ship with 1 rotating bubble turret witch can go 360 around to protect the ship and it can shoot 2 torpedos from it bow why also dropping bombers from it underside

https://youtu.be/Y49iVH7OqFw

.

.

.

Z-95  Headhunter

A joint venture between Incom and Sublights Products Corporation, The Z-95 Headhunter primary multi-role starfighter. The Z-95 Headhunter was a 75,000-credit starfighter designed specifically for the Navy to take advantage of the physical and mental capabilities t was fast and agile ach gave the fighter a punch well out of proportion to its size of 16.74 meters long and 18.13 meters wide The fighter was also armed with Taim & Bak manufactured KX5 laser cannons as well as close-ranged sensors and a day's worth of consumables

there only room for 1 pilot

https://youtu.be/ZnnnV7IdISM

.

.

.

Aggressive ReConnaissance-170 starfighter

or better known as

ARC 170


The Aggressive ReConnaissance-170 starfighter, also known simply as the ARC-170 starfighter, was a heavy-duty model of starfighter nd was considered the latest in fighter technology. Jointly manufactured by Incom Corporation and Subpro

The Aggressive ReConnaissance-170 was a multipurpose designed for both intense battle and longer deep-space missions. It measured 12.71 in length, contained a , and propelled itself in utilizing two powerful systems. It was piloted by a crew of three—a , co-pilot, and tail , along with an . Long-range scanners and were contained in the vessel's nose. During battle, the craft's opened to expose heat sinks and radiators to help cool the ship, and the two main forward medium located on the underside of its outer wings were uncommonly large and powerful

ts laser cannons could punch through a capital ship's armor, and its twin blaster cannons provided a rear firing arc manned by its tail gunner. Furthermore, proton torpedo launchers increased the craft's usefulness in ship-to-ship combat, and added to its already extensive repertoire in its ability to serve as a bombe

The ARC-170's dispersed the heat generated by air resistance in atmospheric flight, enabling the craft to reach hypersonic speeds.

https://youtu.be/kKMDw7q22-c

.

.

.

Cosmo Tiger II.

Cosmo Tiger II. The fighter is 16.6m long, with the main engine being 2 composite radial flow type cosmo engines, the primary weapon 8 30mm pulse laser guns, and 10 12.7mm machine guns

.

.

.

The LATT

The Low Altitude Assault Transport/infantry (LAAT/i), also known as the Low Altitude Assault Transport, Republic attack gunship, Republic Gunship or Assault Gunship or also known as the LATT was one of the several models in the Low Altitude Assault Transport line of starships that mainly served as gunships and troop transports ts role was to transport troopers as well as offering air-to-ground and air-to-air support

The Low Altitude Assault Transport/infantry gunship was a military repulsorcraft. Besides serving as an infantry transport, the LAAT/i gunship was also used to provide air-to-ground and air-to-air support for Republic forces. The front of the gunship had two double cockpit bubbles where the pilot and co-pilot/gunner sat in single file. The LAAT/i gunship had a pair of chin-mounted laser cannon turrets and a pair of dorsal rocket launchers fed by rear-mounted missile belts ome LAAT gunships were also equipped with a pair of laser-beam turrets on the side When faced with overwhelming enemy fire and could switch them out for huge lights to help see in the dark

LAAT/i gunships were capable of traveling at a speed of 620 kph They were 28.8 meters in length and 6.94 meters in height Besides the pilot and co-pilot/gunner, an LAAT/i could carry between two to four gunners and a maximum of thirty passengers

https://youtu.be/f-nhmMZ_Q3Y

.

.

.

LATT/C


The Low Altitude Assault Transport/carrier, known more simply as the LAAT/c, was a vehicle carrier variant of Rothana Heavy Engineering's Low Altitude Assault Transport series of repulsorlift gunships developed for the army

Manned by a single , the LAAT/c was originally designed to deploy onto battlefields, though it was soon modified to accommodate a number of additional vehicles

using powerful magnetic clamps to hold payloads in place. The LAAT/c shared the same rear-wing configuration common to all LAAT gunships, though it lacked the undercarriage that the more common used to carry into battle, and also lacked the heavy armament of its cousins

A repulsorlift gunship measuring 28.82 meters long he Low Altitude Assault Transport/carrier, or LAAT/c, was a carrier model of the Low Altitude Assault Transport series of gunships. Like the more common Low Altitude Assault Transport/infantry the LAAT/c featured two long wings located at the rear of the craft, and the body of the gunship was considerably thinner than the LAAT/i. A single pilot manned the cockpit in the front of the vehicle, which was considerably wider and taller than the rest of the body, and the front featured two light laser cannons for defense.

Two large cylindrical engines topped the LAAT/c's wings where they joined the body, and the gunship's two magnetic clamp arms were attached to the body underneath the wings The gunship, which could travel at a maximum speed of 620 kilometers per hour, used its magnetic clamps to ferry a wide variety of ground vehicles to and from assault ships and transports in orbit

https://youtu.be/TNiFUmA8vh8

.

.

.

AT TE

The All Terrain Tactical Enforcer (AT-TE) was a multipurpose military ground walker and tank and both It boasted six legs, six laser cannon turrets along the body and a heavy projectile mass-driver cannon on top. it also had magnetic legs meaning it could clime up thing like walls or the side of a mouton

The All Terrain Tactical Enforcer was a low-built vehicle that featured six articulated legs for propulsion. Its body consisted of two armored halves that were connected by a flexible concertina section, which increased the walker's mobility on the field; it was essentially a mechanical version of the arctic horny whelmer, a hardy animal native to Rothana Because its legs were low to the ground, the walker had a relatively low top speed, but it also enjoyed greater stability. As its name suggested, the AT-TE was suitable for all terrains; not only was it able to climb sheer surfaces, it could also scale certain metal surfaces due to its magnetized feet. Furthermore, the walker was capable of surviving in the vacuum of realspace as it was able to be pressurized The AT-TE measured 22.02 meters in length and 9.57 meters in height

The AT-TE's most powerful weapon was a single mass-driver cannon located on the vehicle's dorsal surface, which gave the walker the purpose as a mobile artillery vehicle as well as a tank. Four smaller ball-turret laser cannons were mounted at the front, and two others at the rear. The hexapod's armor could easily deflect small arms fire. The AT-TE could be pierced by tanksmasher rockets, which could result in the destruction of the vehicle's complex propulsion mechanisms

The walker's pilot sat in a forward compartment, while a gunner sat exposed atop the walker to operate the mass-driver cannon he standard version of the AT-TE carried 20 troops and some variants carried smaller All Terrain Reconnaissance Transports in their rear hold Their crews were assisted by an IM-6 medic droid, who attended to any injured clone troopers

https://youtu.be/tsfTDDRXeBE

.

.

.

TX-130 Saber-class fighter tank

The TX-130 Saber-class fighter tank, also known as the Republic Fighter Tank, was a light, quick-strike repulsortank manufactured by Rothana Heavy Engineering

The TX-130 Saber-class fighter tank was a light repulsortank manufactured by Rothana Heavy Engineering. The TX-130 was considered quick and nimble for an armored fighting vehicle and was able to enter a fight quickly, give significant damage, and escape unharmed. In that capacity, it was sometimes compared to the Delta-7 Aethersprite-class starfighter.

The TX-130 was equipped with a versatile complement of weapons. Their primary weapons were a pair of fire-linked heavy laser cannons mounted to the hull. The cannons had a fixed forward-firing arc, although, they could easily be brought to bear on enemy targets due to the TX-130's agility. The TX-130 was also equipped with either a twin medium laser cannon turret atop the tank or a Taim & Bak KB-50a beam cannon. Some tanks were not equipped with a top gun

The TX-130 also made use of rapid-fire ordnance launcher mounted on each of the vehicle's sponsions This ordnance launcher could utilize Armor-Piercing Shells TX-130 tanks were outfitted with lightweight ablative armor, allowing it to defend itself against light anti-vehicle weapons and increase its survivability The TX-130's crew included two pilots, a vehicle commander, and a gunner. An astromech droid could also be used, and the TX-130 could carry two passengers. It had a cargo-carrying capacity of 20 tons, and costed 85,000 credits

The TX-130 tank was designed to provide infantry support, engage light enemy armor, and escort allied forces. TX-130 used their mix of versatile weapons to give their Military and officers tactical flexibility. They were also used for anti-armor and anti-fortification roles with their heavier armament. A group of TX-130 Saber-class fighter tanks was referred to as a squadron, while another sized group was referred to as a platoon The TX-130 was designed with the tactical flexibility of a starfighter, making it swift and agile

https://youtu.be/EgTwdVHsRro

Bạn đang đọc truyện trên: Truyen247.Pro